header

For Your Functional Ink & Coating Requirements

...Start Here

globeConductive Silver Inks/Coatings

Remove Product Number & Description Application Key Feature Product Features Substrate Application Method Surface Resistance PDF
Compare Product Number & Description Application Key Feature Product Features Substrate Application Method Surface Resistance PDF
AG-500A
Silver Conductive Ink
Highly reliable membrane switches in appliance, military, medical applications & sensors; also best for EL panels with ITO (indium tin oxide),touch screen or substrates with difficult adhesion Better conductivity than AG-510. Lower cost. Better structural and heat resistance than AG-800 for high reliability applications. Very good hard crease resistance. Polyester, polyimide, PET, and best product to print onto ITO and sputtered glass Screen print, or thin to spray or dip for EMI/RFI < .010 Ω/square/mil (spec); .005 Ω/square/mil (typical) PDF
AG-510
Silver Conductive Ink
Highly reliable membrane switches in appliance, military, medical applications & sensors; also best for EL panels with ITO (indium tin oxide),touch screen or substrates with difficult adhesion AG-510 uses faster drying solvent for shorter drying time than AG-800 Polyester, polyimide, PET, and best product to print onto ITO and sputtered glass Screen print, or thin to spray or dip for EMI/RFI < .015 Ω/square/mil PDF
AG-530
Flexible Silver Conductive Ink
Membrane switch, touch screens, electroluminescent panels (EL) and other printed electronic applications Extremely flexible silver conductive ink. Recommended for thermoforming applications. Crease resistant. Excellent adhesion. Polyester, polyimide, indium tin oxide and most textile substrates Screen print, or thin to spray or dip < .020 Ω/square/mil PDF
AG-800
Silver Conductive Ink
Flex circuits, membrane switch & other printed applications For standard applications requiring excellent conductivity at reasonable cost. Can be blended with C-200 to achieve intermediate conductivity resistances Polyester, polyimide, metal and polycarbonate Screen print, or thin to spray or dip < .015 Ω/square/mil PDF
AG-919
Heat Stable Silver Ink
Flex circuits, membrane switch, EMI/RFI shielding & other printed applications Heat stable at heat temperatures of 180 to 200°C Can be blended with HTC-300 to achieve intermediate conductivity resistances and can be printed as thin base layers for plating processes Polyester, polyimide, metal, and polycarbonate Screen print, or thin to spray or dip < .040 Ω/square/mil PDF
AG-1074
Silver Conductive Ink
Pad print applications Pad printable, electrically conductive ink Dries quickly at room temperature Polyester, polyimide, and most other polymer substrates, as well as metal Pad Print < .050 Ω/square /mil PDF
Z-904
UV Curable Anisotropic Ink
For printing or over coating conductive ink tail pins on membrane switches to provide silver ink protection when ZIF or crimp type metal connectors are attached, while still maintaining electrical conductivity between the metal connector and the silver ink used in flexible circuits and membrane switches. UV curable. Can be cured with UV light in seconds, allowing for high-speed production. Anisotropic ink conductive in the z-axis thickness only, not along length or width Print treated polyester, other plastic films, conductive inks & most metal foils Screen print < 5.0 x 1014 Ω/square /mil PDF