header

For Your Functional Ink & Coating Requirements

...Start Here

globePrinted Heaters & Thermal Targets

Surface Resistivity: < .010 Ω/square/mil when fully dried

Applications:

  • Circuit and Electromechanical Assemblies
  • EL Panel and LED Lighting
  • Membrane switch
  • Touch screens
  • Printed Heaters
  • Other printed electronic applications

Features:

  • Screen printable
  • Fast drying
  • Extremely tough, scuff resistant and crease resistant
  • Ideal for long traces
  • Excellent adhesion to polyester, polyimide, ITO and most other substrates
  • Compatible with our UV curable dielectrics, all of our conductive epoxy adhesives and our UV curable component encapsulants and conformal coatings

Download the AG-500A data sheet.

Surface Resistivity: < .015 Ω/square /mill when fully dried

Applications:

  • Membrane switches
  • Additive circuits
  • Printed Heaters
  • PTF Circuits
  • Defibrillator pads
  • EKG/EEG Electrodes
  • Blood glucose sensors
  • EMI/RFI applications
  • EL panels

Features:

  • Screen print
  • Fast drying
  • High conductivity
  • Thin for spray or dipping
  • Can blend with carbon to customize resistance

Download the AG-510 data sheet.

Surface Resistivity: < 0.015 Ω/square/mil

Applications:

  • Flex circuits
  • Membrane switches
  • Additive circuits
  • EMI/RFI applications
  • Thermal targets

Features:

  • Good conductivity
  • Screen print
  • Thin for spray or dipping
  • Can blend with carbon to customize resistance
  • Crease resistant

Download the AG-800 data sheet.

Surface Resistivity: < 50 Ω/square/mil

Applications:

  • Membrane switches
  • Overprint for silver conductive traces
  • Flex circuits
  • Additive circuits

Features:

  • Screen print, spray, dip or coat
  • Excellent adhesion to metal, polyester & polyimide substrates
  • Can be blended with AG-800 for specific resistance values
  • Can be used as base electrode for EL panels

Download the C-200 data sheet.

Surface Resistivity: > 100 Ω/square/mil

Applications:

  • PTF circuits
  • Printed heater circuits
  • Printed rheostats
  • Flex circuits
  • Additive circuits

Features:

  • Thermoplastic
  • Used for higher temperatures
  • Tough, durable surface finish
  • Screen printable, especially for fine line/fine pitch
  • Excellent adhesion to polyester & polyimide surfaces
  • Can be blended with silver filled ink for specific resistance values

Download the HTC-300 data sheet.

Surface Resistivity: 5.0 x 1014 W/square (X and Y axis only)

Applications:

  • For screen printing over conductive ink tail pins on flexible circuits and membrane switches, to provide protection for silver ink when using ZIF or crimp type metal connectors, while still maintaining electrical conductivity between the metal connector and the silver ink pin.

Features:

  • Designed to conduct electricity on the Z-axis through the thickness, and not along the width (X-Axis) or length (Y-Axis) of the printed ink.
  • Excellent strength, toughness, flexibility, inherent moisture resistance, and low odor.

Download the Z-904 data sheet.

Applied Ink Solutions Product Matrix