header

For Your Functional Ink & Coating Requirements

...Start Here

globeCircuit & Electromechanical Assemblies

Surface Resistivity: < .010 Ω/square/mil when fully dried

Applications:

  • Circuit and Electromechanical Assemblies
  • EL Panel and LED Lighting
  • Membrane switch
  • Touch screens
  • Printed Heaters
  • Other printed electronic applications

Features:

  • Screen printable
  • Fast drying
  • Extremely tough, scuff resistant and crease resistant
  • Ideal for long traces
  • Excellent adhesion to polyester, polyimide, ITO and most other substrates
  • Compatible with our UV curable dielectrics, all of our conductive epoxy adhesives and our UV curable component encapsulants and conformal coatings

Download the AG-500A data sheet.

Surface Resistivity: < 0.015 Ω/square/mil

Applications:

  • Flex circuits
  • Membrane switches
  • Additive circuits
  • EMI/RFI applications
  • Thermal targets

Features:

  • Good conductivity
  • Screen print
  • Thin for spray or dipping
  • Can blend with carbon to customize resistance
  • Crease resistant

Download the AG-800 data sheet.

Surface Resistivity: < 10,000 Ω/square/mil. Resistance values as low as 200Ω/sq. are possible with custom blends.

Applications:

  • Coating for paper, cardboard, wood and most plastic substrates
  • Saturant for urethane foam

Features:

  • Water-based antistatic coating or saturant
  • Can be dipped, roll coated or sprayed
  • Can be crosslinked for increased hardness & durability

Download the Antistat-268 data sheet.

Surface Resistivity: < 30 Ω/square/mil

Applications:

  • Coating for paper, cardboard, wood, metal and most plastic substrates
  • Saturant for urethane foam

Features:

  • More conductive version of Antistat-268
  • Rotogravure, spray, coat, dip
  • Water-based antistatic coating or saturant

Download the C-808 data sheet.

Volume Resistivity: < 1.0 x 10-3 Ω-cm

Applications:

  • Component or wire attachment
  • Filling via holes or spacers

Features:

  • Two-part electrically conductive epoxy
  • Dot dispense, screen print or manual dispense
  • Low cure temperature
  • Fast curing
  • Suitable for flexible substrates
  • 6 month shelf life
  • Available in pre-measured CC-Paks, bulk or syringes

Download the EP-600 data sheet.

Volume Resistivity: < 1.0 x 1014 Ω-cm

Applications:

  • Potting components or assemblies
  • Protection against moisture
  • Protection against thermal or mechanical shock

Features:

  • Excellent moisture resistance
  • Excellent toughness and flexibility
  • Fast curing
  • Excellent mechanical properties and heat resistance

Download the EP-799 data sheet.

Volume Resistivity: < 5 x 10-4 Ω-cm

Applications:

  • Component attachment & termination on hybrid circuits, membrane switches & other assemblies

Features:

  • One-part epoxy
  • 30-day shelf life
  • Screen or stencil printing

Download the EP-1100 data sheet.

Surface Resistivity: 30 Ω/square/mil

Applications:

  • PTF circuits
  • Printed heater circuits
  • Printed rheostats
  • Flex circuits
  • Additive circuits

Features:

  • Thermoplastic
  • Used for higher temperatures
  • Tough, durable surface finish
  • Screen printable, especially for fine line/fine pitch
  • Excellent adhesion to polyester & polyimide surfaces
  • Can be blended with silver filled ink for specific resistance values

Download the HTC-300 data sheet.

Surface Resistivity: @25°C 2.9 x 1013 Ω/square/mil

Applications:

  • Printed insulation layers for circuits
  • Touch screens
  • El panels
  • Flexible printed substrates

Features:

  • 100% solids
  • Adheres to difficult substrates such as ITO or other metal oxides
  • Screen print, dip, roll, knife over roll, and curtain coating

Download the UV-1006S data sheet.

Surface Resistivity: @25°C 5.0 x 1015 Ω/square

Applications:

  • PTF circuits
  • Flexible circuit substrates
  • Printed insulation layers for circuits
  • Dielectric layer for membrane switch crossover and tail coat applications on flexible circuits & membrane switches

Features:

  • Matte finish
  • Screen printable, dip, roll, knife over roll, curtain coating or die application
  • 100% solids
  • Available in clear translucent, blue or green colors
  • Low odor

Download the UV-2530 data sheet.

Surface Resistivity: @25°C 5.0 x 1015 Ω/square/mil

Applications:

  • PTF circuits
  • Flexible circuit substrates
  • Printed insulation layers for circuits
  • Dielectric layer for membrane switch crossover and tail coat applications on flexible circuits & membrane switches

Features:

  • Glossy finish
  • Screen print, dip, roll, knife over roll coating, curtain coating or die application
  • 100% solids
  • Available in clear, blue or green colors
  • Low odor

Download the UV-2531 data sheet.

Surface Resistivity: @25°C 3.8 x 1014 Ω/square/mil

Applications:

  • Component encapsulation
  • Wire or component staking

Features:

  • 100% solids
  • Dot dispensable
  • Moisture resistant
  • Suitable for flexible substrates
  • Can be sprayed or dipped

Download the UV-3010 data sheet.

Surface Resistivity: 5.0 x 1014 W/square (X and Y axis only)

Applications:

  • For screen printing over conductive ink tail pins on flexible circuits and membrane switches, to provide protection for silver ink when using ZIF or crimp type metal connectors, while still maintaining electrical conductivity between the metal connector and the silver ink pin.

Features:

  • Designed to conduct electricity on the Z-axis through the thickness, and not along the width (X-Axis) or length (Y-Axis) of the printed ink.
  • Excellent strength, toughness, flexibility, inherent moisture resistance, and low odor.

Download the Z-904 data sheet.

Applied Ink Solutionss Product Matrix