header

For Your Functional Ink & Coating Requirements

...Start Here

globeCarbon Inks/Coatings

Remove Product Number & Description Application Key Feature Product Features Substrate Application Method Surface Resistance PDF
Compare Product Number & Description Application Key Feature Product Features Substrate Application Method Surface Resistance PDF
Antistat-268
Water-Based Carbon Resistive Coating
Saturant foam for antistatic packaging or coating various substrates Water-based carbon coating with low viscosity that provides antistatic properties. Use as a saturant or surface coating. Available with crosslinker to harden to even tougher finish. Resistance values as low as 200Ω/square are possible with custom blends. Less conductive than C-808. Plastic, paper, cardboard, urethane foam, textiles; surface coating wood & concrete Saturation, roll, spray, rotogravure, coat or dip. (Not suitable for screen printing) < 10,000 Ω/square/mil PDF
C-200
Carbon Resistive Ink
Membrane switch, flex circuit, additive circuits and back electrode for EL panels on barium titanate For screen printing traces and discrete resistance pads, and as an overprint for silver conductive traces . Can be blended with AG-800 to achieve intermediate resistances. Maximum operating temperature is 70°C Polyester, polyimide and metal Screen print, spray, dip or coat < 30 Ω/square/mil (spec); 16 Ω/square/mi (typical) PDF
C-220
Carbon Resistive Ink
Membrane switch, flex circuit and additive circuits Very conductive overcoat for use with multiple ink binders Next generation of C-210 (no longer offered) which has better drying time and improved compatibility with silver inks. Maximum operating temperature is 70°C Most substrates Screen print, flexographic, print, spray, dip or coat < 15 Ω/square/mil PDF
C-808
Highly Conductive Water-based Coating
Antistatic coating Water-based carbon coating with higher conductivity than Antistat-268 Excellent metal adhesion Paper, cardboard, wood, urethane foam, metal and most plastic substrates Rotogravure, spray, coat, dip or saturation < 30 Ω/square/mil (spec); 14 Ω/square/mil (typical) PDF
HTC-300
High Temperature Carbon Ink
For higher temperature applications. Suitable for screen printed heaters & flex circuits Can be blended with AG-919 to achieve specific resistance values for improved conductivity. High temperature applications; Maximum operating temperature is 140°C and forays to 200°C Polyester, polyimide and metal (not for ITO) Screen print < 100 Ω/square/mil PDF