header

For Your Functional Ink & Coating Requirements

...Start Here

globeMembrane Switches

Surface Resistivity: < .010 Ω/square/mil when fully dried

Applications:

  • Circuit and Electromechanical Assemblies
  • EL Panel and LED Lighting
  • Membrane switch
  • Touch screens
  • Printed Heaters
  • Other printed electronic applications

Features:

  • Screen printable
  • Fast drying
  • Extremely tough, scuff resistant and crease resistant
  • Ideal for long traces
  • Excellent adhesion to polyester, polyimide, ITO and most other substrates
  • Compatible with our UV curable dielectrics, all of our conductive epoxy adhesives and our UV curable component encapsulants and conformal coatings

Download the AG-500A data sheet.

Surface Resistivity: < .015 Ω/square /mill when fully dried

Applications:

  • Membrane switches
  • Additive circuits
  • Printed Heaters
  • PTF Circuits
  • Defibrillator pads
  • EKG/EEG Electrodes
  • Blood glucose sensors
  • EMI/RFI applications
  • EL panels

Features:

  • Screen print
  • Fast drying
  • High conductivity
  • Thin for spray or dipping
  • Can blend with carbon to customize resistance

Download the AG-510 data sheet.

Surface Resistivity: < 0.015 Ω/square/mil

Applications:

  • Flex circuits
  • Membrane switches
  • Additive circuits
  • EMI/RFI applications
  • Thermal targets

Features:

  • Good conductivity
  • Screen print
  • Thin for spray or dipping
  • Can blend with carbon to customize resistance
  • Crease resistant

Download the AG-800 data sheet.

Surface Resistivity: < 50 Ω/square/mil

Applications:

  • Membrane switches
  • Overprint for silver conductive traces
  • Flex circuits
  • Additive circuits

Features:

  • Screen print, spray, dip or coat
  • Excellent adhesion to metal, polyester & polyimide substrates
  • Can be blended with AG-800 for specific resistance values
  • Can be used as base electrode for EL panels

Download the C-200 data sheet.

Surface Resistivity: < 15 Ω/square/mil

Applications:

  • Membrane switches
  • Overprint for silver conductive traces
  • Flex circuits
  • Additive circuits

Features:

  • Screen print, spray, dip or coat
  • Excellent adhesion to polyester & polyimide substrates
  • Not recommended on ITO
  • Can be blended with AG-800 for specific resistance values
  • Can be used as base electrode for EL panels

Download the C-220 data sheet.

Applications

  • Touch Screens
  • Electroluminescent Lamps
  • Capacitive Touch Sensors
  • Membrane Switches

Features

  • Transparent
  • Screen printable
  • For use on flexible or rigid substrates
  • Replaces fragile ITO
  • Thermoformable
  • Compatible with most products in the Applied Ink Solutions product line.

Download the Clear Conductive Inks data sheet.

Volume Resistivity: < 1.0 x 10-3 Ω-cm

Applications:

  • Component or wire attachment
  • Filling via holes or spacers

Features:

  • Two-part electrically conductive epoxy
  • Dot dispense, screen print or manual dispense
  • Low cure temperature
  • Fast curing
  • Suitable for flexible substrates
  • 6 month shelf life
  • Available in pre-measured CC-Paks, bulk or syringes

Download the EP-600 data sheet.

Volume Resistivity: < 1.0 x 10-3 Ω-cm

Applications:

  • Component attachment & termination on hybrid circuits, membrane switches & other assemblies

Features:

  • Two-part electrically conductive epoxy
  • For stencil printing processes
  • Low cure temperature
  • Excellent bond strength, temperature resistance and toughness
  • 6 month shelf life
  • Available in pre-measured CC-paks or bulk packaging

Download the EP-900 data sheet.

Volume Resistivity: < 5 x 10-4 Ω-cm

Applications:

  • Component attachment & termination on hybrid circuits, membrane switches & other assemblies

Features:

  • One-part epoxy
  • 30-day shelf life
  • Screen or stencil printing

Download the EP-1100 data sheet.

Surface Resistivity: @25°C 5.0 x 1015 Ω/square

Applications:

  • PTF circuits
  • Flexible circuit substrates
  • Printed insulation layers for circuits
  • Dielectric layer for membrane switch crossover and tail coat applications on flexible circuits & membrane switches

Features:

  • Matte finish
  • Screen printable, dip, roll, knife over roll, curtain coating or die application
  • 100% solids
  • Available in clear translucent, blue or green colors
  • Low odor

Download the UV-2530 data sheet.

Surface Resistivity: @25°C 5.0 x 1015 Ω/square/mil

Applications:

  • PTF circuits
  • Flexible circuit substrates
  • Printed insulation layers for circuits
  • Dielectric layer for membrane switch crossover and tail coat applications on flexible circuits & membrane switches

Features:

  • Glossy finish
  • Screen print, dip, roll, knife over roll coating, curtain coating or die application
  • 100% solids
  • Available in clear, blue or green colors
  • Low odor

Download the UV-2531 data sheet.

Surface Resistivity: @25°C 3.8 x 1014 Ω/square/mil

Applications:

  • Component encapsulation
  • Printed circuit board protection

Features:

  • 100% solids
  • Dot dispensable
  • Moisture resistant
  • Suitable for flexible substrates
  • Can be sprayed or dipped

Download the UV-3010 data sheet.

Applied Ink Solutions Product Matrix